0(0)

CPC31220 – Certificate III in Wall and Ceiling Lining

  • by admin
  • Course level: All Levels

Description

This qualification provides a trade outcome in wall and ceiling lining for residential and commercial construction work. The qualification has core unit of competency requirements that cover common skills for the construction industry, as well as the specialist field of work wall and ceiling liner. Wall and ceiling liners apply and fix linings for non-structural walls and ceilings.

Occupational titles may include:

  • Wall and ceiling liner
  • Drywaller
  • Plasterer

Enrol Now

Mapping :

  • Supersedes and is equivalent to CPC31211 Certificate III in Wall and Ceiling Lining. 

State and territory jurisdictions may have different licensing, legislative, regulatory or certification requirements. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.

This qualification is suitable for an Australian apprenticeship pathway.

Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.

Entry Requirements :

There are no entry requirements for this qualification.

To achieve this qualification, the candidate must demonstrate competency in:

29 units of competency:

  • 22 core units
  • 7 elective units.

Electives must be selected as follows:

  • all seven units from the electives listed below, or
  • five units from the electives listed below, plus two units selected from any current training package or accredited course as long as they contribute to a valid, industry-supported vocational outcome, maintain the integrity of the AQF level of this qualification and do not duplicate the outcome of another unit used to achieve this qualification.

Prerequisite units 

An asterisk (*) against a unit code below indicates that there is a prerequisite requirement that must be met. Prerequisite unit(s) must be assessed before assessment of any unit of competency with an asterisk. Check the unit of competency for information on specific prerequisite requirements. All prerequisite requirements are packaged in the qualification.

Core Units:

  • CPCCCA3014* Construct and install bulkheads
  • CPCCCA3026* Assemble partitions
  • CPCCCM2012* Work safely at heights
  • CPCCOM1012 Work effectively and sustainably in the construction industry
  • CPCCOM1013 Plan and organise work
  • CPCCOM1014 Conduct workplace communication
  • CPCCOM1015 Carry out measurements and calculations
  • CPCCOM2001* Read and interpret plans and specifications
  • CPCCPB3001* Fix standard plasterboard wall sheets
  • CPCCPB3002* Fix standard plasterboard ceiling sheets
  • CPCCPB3003* Fix battens
  • CPCCPB3004* Fix wet area sheets
  • CPCCPB3005* Fix ceiling sheets to external protected areas
  • CPCCPB3006* Fix fibre cement board
  • CPCCPB3007* Apply levels of finish standards to planning and inspection of own work
  • CPCCPB3008* Mix plastering compounds
  • CPCCPB3009* Finish plasterboard joints manually
  • CPCCPB3010* Manually sand plaster work
  • CPCCPB3012* Cut and fix paper-faced cornices
  • CPCCWC3003* Install dry wall passive fire-rated systems
  • CPCCWC3004* Install suspended ceilings
  • CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry

Elective Units :

  • BSBESB301 Investigate business opportunities
  • BSBESB407 Manage finances for new business ventures
  • CPCCCA3001* Carry out general demolition of minor building structures
  • CPCCCA3010* Install windows and doors
  • CPCCCM2006 Apply basic levelling procedures
  • CPCCCM2007* Use explosive power tools
  • CPCCCM2008* Erect and dismantle restricted height scaffolding
  • CPCCCM3001 Operate elevated work platforms up to 11 metres
  • CPCCPB3014* Install bulk insulation and pliable membrane products
  • CPCCPB3015* Install acoustic and thermal environmental protection systems
  • CPCCPB3016* Install and finish columns
  • CPCCPB3017* Rectify faults in drywall applications
  • CPCCPB3018* Use vacuum and electric sanding equipment to finish plaster work
  • CPCCPB3019* Inspect equipment for serviceability
  • CPCCPB3020* Match, mitre and install cast ornamental cornices
  • CPCCPB3021* Install and fix residential acoustic plaster products
  • CPCCPB3022* Use mechanical jointing equipment to finish joints
  • CPCCPB3027 Install ceiling insulation products
  • CPCCSP3003* Apply trowelled texture coat finishes
  • CPCCSP3005* Install pre-cast decorative mouldings
  • CPCCWC2001* Complete penetrations and flashings
  • CPCCWC3001* Install and finish plasterboard and fibre cement sheeting to curved wall and ceiling substrates
  • CPCCWC3002* Install and finish plasterboard and fibre cement sheeting to arch substrates
  • CPCSHP3007* Install prefabricated internal shopfitting units

Course Code : CPC31220

Course Title : Certificate III in Wall and Ceiling Lining

Industries: Construction

Occupations: Fibrous Plasterer

Through theoretical and practical course work, you will learn to:

  • Mix plastering compounds
  • Fix fibre cement boards
  • Interpret plans and specifications
  • Carry out measurements and calculations
  • Complete basic levelling procedures

Develop the personal attributes that will help you get ahead:

  • Effective communication
  • Problem solving
  • Collaborative nature
  • Punctual and reliable

Completing this course will provide you with:

  • A nationally recognised qualification at Certificate III level
  • Eligibility to apply for your trade licence
  • Skills and knowledge to start your own sole trader business

Career opportunities:

  • Fibrous plasterer
  • Wall and ceiling liner

Grow Your Career :

  • Certificate IV of Building (apprenticeship options available)

Infrastructure in Australia is at an all-time high, with residential, commercial and industrial builds sky-rocketing all over the country. The building industry is seeking qualified and licensed wall and ceiling liners who can keep up with the demand.

NSTA™ BUILDING COURSES :

NSTA™ provides authentic building and construction courses in Australia, providing certificate III in painting and decorating and certificate III in carpentry in Australia. The relevant certifications will provide assured employment offers in the building and construction industry.

CPC30111 – Certificate III in Bricklaying / Blocklaying

CPC30211 – Certificate III in Carpentry

CPC30318 – Certificate III in Concreting

CPC31220 – Certificate III in Wall and Ceiling Lining

What Will I Learn?

  • The nationally recognised Certificate III in Wall and Ceiling Lining will give you a strong foundation for a career in the building industry. Renovate, extend and create projects with your new fibrous plastering and building skills, gain your trade licence and work towards owning your own business.

Topics for this course

46 Lessons

Core Units

CPCCCA3014* Construct and install bulkheads
CPCCCA3026* Assemble partitions
CPCCCM2012* Work safely at heights
CPCCOM1012 Work effectively and sustainably in the construction industry
CPCCOM1013 Plan and organise work
CPCCOM1014 Conduct workplace communication
CPCCOM1015 Carry out measurements and calculations
CPCCOM2001* Read and interpret plans and specifications
CPCCPB3001* Fix standard plasterboard wall sheets
CPCCPB3002* Fix standard plasterboard ceiling sheets
CPCCPB3003* Fix battens
CPCCPB3004* Fix wet area sheets
CPCCPB3005* Fix ceiling sheets to external protected areas
CPCCPB3006* Fix fibre cement board
CPCCPB3007* Apply levels of finish standards to planning and inspection of own work
CPCCPB3008* Mix plastering compounds
CPCCPB3009* Finish plasterboard joints manually
CPCCPB3010* Manually sand plaster work
CPCCPB3012* Cut and fix paper-faced cornices
CPCCWC3003* Install dry wall passive fire-rated systems
CPCCWC3004* Install suspended ceilings
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry

Electives Units

Free

Material Includes

  • Construction, Plumbing and Services Training Package

Requirements

  • There are no entry requirements for this qualification.

Target Audience

  • Construction
  • Building
  • Wall and ceiling liner
  • Fibrous Plasterer
[ninja_form id=2]

Ready to change your career?

Let’s get started!